Introducing the DYE Synchronised Twin Cylinder DNC controlled NGX2 series press brake.
These press brakes are designed and built for customers who demand precision, speed and durability.
Based on a proven design that features strength, rigidity and quality components, including the range of Swiss made Cybelec DNC controllers, DYE NGX2 series press brakes are the ideal investment to maximise productivity.
DYE NGX2 series press brakes use high quality linear encoders to measure the exact position of the top tool relative to the bottom tool. This, along with the C- frame encoder mounting, ensures customers can be confident that their DYE press brake is highly accurate and repeatable.
From the wide range of options including Cybelec controllers, back gauges and tooling systems, the DYE NGX2 series Standard Press Brake can be optioned to meet customers' specific requirements and applications.
DYE NGX2 series press brakes are designed to meet your needs, from the biggest production run to the smallest one-off job.
When control really matters - then only the best Cybelec controllers will do.
Maximum measurement - maximum accuracy.
Real accuracy - real control.
Designed specifically for press brakes providing operator protection and yet maintaining machine usability and productivity. Read more
- Hydraulic system with safety middle-position monitoring
- Lazersafe PCSS with LZS004 guard
- Rear entry safety guard, and side throat guards
- Soft start on pump motor (to minimise peak loads on your factory's power supply)
- Reverse polarity protection.
Quality tooling is available from manufacturers like Wila and Ferrari.
DYE NGX2 series press brakes utilise two linear encoders [Y1 - Y2] mounted on each side of the top beam. These measure the exact distance between the top tool and the bottom tool to an accuracy of 0.005mm. Both encoders travel on a zero clearance linear track system ensuring that the information sent to the control valves [valve 1 & valve 2] allows the top tool to be positioned parallel to the bottom tool, or the beam can be tilted, as required, on each step of the program. With this precise control over the bending process, every job can be completed as intended.
The DNC880S is a compact colour 2D Windows® based controller that can control the press brake rams (Y1 & Y2), crowning, plus up to five other axes. These additional axes could include just an X-axis back gauge or a back gauge with X, R, Z1 & Z2 axes for example.
The DNC880S is equipped with a large LCD colour screen. The keyboard is also equipped with large keys allowing fast and easy data entry, even while wearing protective gloves.
The DNC880S software is menu driven and has five main menu keys that give immediate access to simple and straightforward menus. Some fields are also colour coded to show where data can be selected from an existing list. Features like this make the controller very user friendly, easy to use and suitable for both inexperienced and experienced operators.
To obtain a quality finished product, the bend angles must not only be precise but also consistent along the entire sheet length. This means that the table and top beam (hence top and bottom tooling) must be parallel along their entire length during bending. DYE's active system enables this to happen during folding and it is adjusted for each fold by the controller automatically. This system is known as the DYE Anti Deflection System or ADS. This system guarantees much greater precision than the traditional passive systems of shimming with paper or the use of an intermediate beam with compensation by wedges.
For machines that are CE Standard they include the following safety features:
- Hydraulic system with middle-position monitoring
- A choice of either AKAS or Lazersafe guard system
- Rear entry safety guard and side throat guards with interlocks
These guard systems are designed specifically for press brakes providing operator protection and yet maintaining machine usability and productivity.
The AKAS system automatically adjusts for different tooling setups (Lazersafe is manual adjustment) and both include functions for folding material with turn-ups (eg. boxes) and will cope with even the most complex folding jobs.
Bottom Tooling Option
Standard bottom tooling arrangement can be selected from - custom multi v bottom tool arrangement - single v bolster - or the 60mm bolster.
Heavy-duty X & R axis back gauge with manual Z probes. X & R axes are complete with twin ball screws and linear tracks and linear carriages. Each X-axis linear system is mounted on the side frames to maximise the area available for reverse bends that fold down behind the machine. The latest technology AC servomotors and belt drives power all axes.
Includes two probes that are manually adjusted in the Z movements. Standard X-axis movement 500mm and R-axis movement 200mm. (Available with DNC60, DNC880 or Mod Eva controllers)
The [ ECO ] range of press brakes lets you choose a high quality machine with the same basic design as our more sophisticated machines - but at a lower cost.